Home   |   About Us   |   Customer Support   

Products   |   Solutions   |   Technology   |   Environmental Issues   |   Where to buy    

 
 
Home>>Products>>Structured Cabling Systems
 

Category 3 110-Type Rack Mount Patch Panels

Category 3 110-Type Rack Mount Patch Panels

The Modular Patch Panel is designed to be connected directly to the 110-type blocks on the rear of the patch panel. The wiring insertion loss is reduced by a fewer number of connection points. The 110-type Modular Patch Panels are available in 2, 4, 6, 8-wire and 10Base-T versions. Pin separation slots prevent shorts and insure proper termination to all RJ-12 or RJ-45 jacks.

Ordering Information
Part Number, Ports, Jack Position/Conductor, Active Pins, Rackspaces

  • PATCH-224-110 24, 6P2C*, 3&4, 2
  • PATCH-424-110 24, 6P4C*, 2-5, 2
  • PATCH-624-110 24, 6P6C*, 1-6, 2
  • PATCH-824-110 24, 8P8C*, 1-8, 2
  • PATCH-824-110T** 24, 8P4C*, 1,2,3 & 6, 2

Products | Solutions | Technology | Where to Buy | Customer Support | Site Map | Feedback

Copyright@2010UNICOM