Home   |   About Us   |   Customer Support   

Products   |   Solutions   |   Technology   |   Environmental Issues   |   Where to buy    

 
 
Home>>Products>>Structured Cabling Systems
 

Category 3 110-Type Rack Mount Patch Panels

Category 3 110-Type Rack Mount Patch Panels

The Modular Patch Panel is designed to be connected directly to the 110-type blocks on the rear of the patch panel. The wiring insertion loss is reduced by a fewer number of connection points. The 110-type Modular Patch Panels are available in 2, 4, 6, 8-wire and 10Base-T versions. Pin separation slots prevent shorts and insure proper termination to all RJ-12 or RJ-45 jacks.

Part Number 
PATCH-224-110
Desc.
Pin/Jacks:2 Port Jack:24 Position/Conductor:6P2C Active Pins:3&4 Rackspaces:2

Part Number
PATCH-424-110
Desc.
Pin/Jacks:4 Port Jack:24 Position/Conductor:6P4C Active Pins:2-5 Rackspaces:2

Part Number
PATCH-624-110
Desc.
Pin/Jacks:6 Port Jack:24 Position/Conductor:6P6C Active Pins:1-6 Rackspaces:2

Part Number
PATCH-824-110
Desc.
Pin/Jacks:8 Port Jack:24 Position/Conductor:8P8C Active Pins:1-8 Rackspaces:2

Part Number
PATCH-824-110T**
Desc.
Pin/Jacks:8 Port Jack:24 Position/Conductor:8P4C Active Pins:1,2,3&6 Rackspaces:2

 

* P= # of Positions * C = # of Contacts ** Designed for 10Base-T Applications

Products | Solutions | Technology | Where to Buy | Customer Support | Site Map | Feedback

Copyright@2010UNICOM